Lesela la letlooa la poliester le betliloeng bakeng sa theipi e khomarelang ea indasteri ea likoloi
Selelekela se Khutšoanyane sa Polyester Laid Scrims
Sehlahisoa sena keScrim ea Polyester e Behiloeng, lesela la ho tiisa le theko e tlase, le sebetsang hantle haholo le entsoeng ka ho khetheha e lesesebelisoa sa ho jara/sepoko bakeng sa litheipi tsa sekhomaretsi tsa indasteri ea likoloi(theipi ea foam, rabara le theipi ea polasetiki, theipi ea scrim e mahlakore a mabeli, jj.). E etsoa ka likhoele tsa polyester tse khomarelang ka lik'hemik'hale ka har'a moaho o bulehileng oa letlooeng (sekwere kapa o nang le mahlakore a mararo), ka litsamaiso tsa binder tse ikhethileng (PVOH, PVC, Acrylic, kapa tse etselitsoeng motho ka mong) ho bapisa lits'ebetso tse fapaneng tsa ho koahela, ho laminating, le ho seha ka ho teba tse sebelisoang ke li-converter tsa theipi tsa likoloi. Ha e bapisoa le li-scrims tsa fiber ea khalase, mofuta oa polyester o fana kaho ikutloa ka letsoho ho bonolo, ho tiisa mocheso, le ho tsamaisana hantle le PSA e thehiloeng ho acrylic / rabara— bohlokoa haholo ha theipi e tlameha ho phela ka nako e telele mochesong o ka tlas'a sekoahelo, tikoloho ea NVH cabin, le ho beoa ha die-cutting/roboto ka boiketsetso meleng ea likoloi. Scrim e laminated pakeng tsa mealo ea sekhomaretsi kapa e kentsoe ka har'a sesebelisoa sa theipi ho ba "grid e patiloeng ea tensile" e thibelang ho otlolla, ho taboha le ho phahamisa bohale nakong ea ts'ebeliso le ts'ebeletso ea nako e telele. Sehlahisoa se ka fetoloa haholo, ka bophara ba meqolo ho tloha ho 200 ho isa ho 2500 mm le bolelele ba meqolo ho fihlela ho limithara tse 50,000, e tšehetsang mela e fetolang theipi ea likoloi e lebelo le phahameng, e tsoelang pele.
Litšobotsi tsa Li-Scrims tsa Polyester tse Behiloeng
E etselitsoe Litšebeliso tsa Theipi ea Likoloi:.Sekoahelo sa polyester se na le thepa e hahiloeng bakeng sa bajari ba theipi e khomarelang — matla a ho tsikinyeha, ho hanyetsa ho taboha, ho tiisa mocheso, thepa ea ho loantša likokoana-hloko, ho hanyetsa metsi, likhetho tsa ho khomarela, botsoalle ba tikoloho, ho bola le ho sebelisoa hape.
Boima bo Phahameng ba Matla le Bobebe bo Phahameng:.Matlafatso e tla ka GSM e tlase haholo. Litlhaloso tse tloaelehileng tsa likoloi/teipi sethaleng sena: CF12.5×12.5PH ~6.2–6.6 g/m², CF10×10PH ~8–9 g/m², CF6.25×6.25PH ~12–13.2 g/m², CF5×5PH ~15.2 g/m², ka 12.5×6.25mm le tsona lia fumaneha. Karolelano e phahameng ea matla ho ea boima e lumella sejari sa teipi ho fumana ho hanyetsa ho taboha le botsitso ntle le ho phahamisa moqolo kapa ho senya ho tenyetseha ho potoloha li-trim tse kobehileng/li-flange tsa 'mele.
Ho Itlhophisa ka Bophara le ho Tsamaellana ha Ts'ebetso:Mefuta ea khoele e fetang polyester (Khalase, Khabone, Kevlar, Nomex, Cotton, Folaxe, Jute, Viscose, jj.), meaho (sekwere / mahlakore a mararo), dipaterone (dikhoele tse 0.8–3/cm), di-binder (PVOH, PVC, Acrylic, tse etselitsoeng wena).
Leqephe la Data la Scrims tsa Polyester
| Nomoro ea Ntho | CF12.5*12.5PH | CF10*10PH | CF6.25*6.25PH | CF5*5PH |
| Boholo ba letlooeng | 12.5 x 12.5mm | 10 x 10mm | 6.25 x 6.25mm | 5 x 5mm |
| Boima (g/m2) | 6.2-6.6g/m2 | 8-9g/m2 | 12-13.2g/m2 | 15.2-15.2g/m2 |
Phepelo e tloaelehileng ea matlafatso e sa lohiloeng le scrim e nang le laminated ke 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm jj. Ligrama tse tloaelehileng tsa phepelo ke 6.5g, 8g, 13g, 15.5g, jj.Ka matla a maholo le boima bo bobebe, e ka kopanngoa ka botlalo le thepa efe kapa efe 'me bolelele ba moqolo ka mong e ka ba limithara tse 10,000.
Kopo ea Li-Scrims tsa Polyester
Tšebeliso ea mantlha: Matlafatso bakeng sa litheipi tse khomarelang tsa indasteri ea likoloi
Kopo ea mantlha le e khethehileng ea scrim ena ea polyester e behiloe kemasapo a thata a patiloeng ka hare ho litheipi tse khomaretsang tsa likoloi— ho kenyeletsoa theipi ea foam, theipi ea rabara le polasetiki, le theipi ea scrim e mahlakore a mabeli — e sebelisetsoang ho kenya mekhabiso ea kahare, ho hokela letšoao la kantle, ho kopanya weatherstrip, li-pad tsa damping tsa NVH, ho lokisa likhoele tsa terata, le ho beha seal/gasket sebakeng sa koloi ea bapalami, CV, le li-EV. E manehiloe pakeng tsa mealo e khomarelang kapa ka har'a sesebelisoa ho:
Ntlafatsa Matla a ho Tenyetseha le ho Hahola bakeng sa Sebaka sa Robotic
Litheipi tsa likoloi hangata li sebelisoa ke matsoho a roboto ka lebelo la mola, ebe li kenngoa ka har'a potoloho ea ho koala lemati, ho thothomela le mocheso (ka tlase ho -40 °C ho isa ho >100 °C). Sekoti se eketsa haholo khanyetso ea mojari ho robeha le ho taboha, ho netefatsa hore tlamo e tšoarella bophelong bohle ba koloi.
Boloka Botsitso ba Dimensional Ka ho Seha le Tšebeletso ka Die-Cutting
Ho lelefala ho tlase ha scrim ho thibela theipi ho otloloha ha e phuthololwa, e sehiloe ka die-cut ka dibopeho tse rarahaneng (di-cutout tsa logo, di-washer tse kobehileng), kapa e kentswe ka hara shear — ho boloka boemo ba karolo bo ngodisitsweng hodima trim/body flange.
Nolofatsa ho Hloekisa ho Chesa le ho Fetola ka Lebelo le Phahameng
Sebopeho sa letlooeng le bulehileng se dumella ho seha dibopeho tse rarahaneng tsa theipi tse hlwekileng, tse se nang burr, ha ho tenyetseha ha scrim ho netefatsa ho phutholoha ho boreleli hodima ho roala le ho taboha ha PSA, ka ho se kgomarela ho fokolang kapa ho sosobana ha liner.
Likopo tsa Bobeli
Ka lebaka la thepa ea eona e tenyetsehang ea matlafatso le moralo o bulehileng oa letlooeng, polyester ena e behileng scrim e boetse e sebelisoa haholo mafapheng a mang a indasteri a thathamisitsoeng leqepheng la sehlahisoa:
Aluminium Foil e kopantsoeng
E sebelisoa e le lera la ho matlafatsa ho kenya mocheso le metsoako ea ho phuthela kaho; bolelele ba meqolo bo fihlang ho 10,000 m bo ntlafatsa katleho ea tlhahiso le ponahalo ea sehlahisoa se felileng.
Matlafatso ea Sehlopha se sa Lohiloeng
E sebelisoa holim'a lesela la fiberglass, materase a polyester, li-wipes le lintho tse holimo joalo ka pampiri ea bongaka — e eketsa matla a ho thaepa ka ho eketsa GSM hanyane.
