Reinforced fiberglass laid scrim aluminum foil composite 5x5mm

Short Description:

Roll Width: 200 to 2500 mm

Roll Length:: Up to 50 000 m

Yarns Type:: Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Construction:: Square, tri-directional

Patterns:: From 0.8 yarns/cm to 3 yarns/cm

Bonding:: PVOH, PVC, Acrylic, customized

Send email to us Download as PDF

Product Detail

Product Tags

Fiberglass Laid Scrims Brief Introduction

This product is a high-performance Fiberglass Laid Scrim characterized by a 5x5mm square mesh (Item No. CF5 * 5PH). It is specifically engineered and reinforced for the production of high-quality aluminum foil composites. As a lightweight, open mesh reinforcement fabric made from chemically bonded continuous glass filaments, it is designed to be the critical structural skeleton within foil laminates, providing exceptional dimensional stability, strength, and compatibility to create durable and reliable composite materials.

Fiberglass Laid Scrims Characteristics

Optimized 5x5mm Mesh Structure: The square 5x5mm mesh provides balanced, multi-directional reinforcement. This structure ensures uniform distribution of forces and offers an optimal balance between fabric density for strength and openness for complete adhesive penetration during lamination with aluminum foil.

Superior Material Properties: This fiberglass scrim possesses a range of beneficial characteristics essential for demanding applications, including high tenacity, excellent dimensional stability, low shrinkage, low elongation, alkali resistance, fire resistance, and corrosion resistance.

High Strength & Light Weight: It delivers substantial tensile and tear resistance while remaining lightweight. For instance, the CF5 * 5PH specification has a weight of approximately 15.2 grams per square meter, exemplifying a favorable strength-to-weight ratio that allows for effective reinforcement without adding excessive mass.

Fiberglass Laid Scrims Data Sheet

Item No.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Mesh Size	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Weight (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Fiberglass Laid Scrims Application

a) Aluminum Foil Composite

Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.

b) PVC Flooring

PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.

c) None-woven category products reinforced

None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.