POLYESTER LAID SCRIM CP2.5*5PH High Performance Nonwoven Reinforcement for DoubleSided Adhesive Tapes
Polyester Laid Scrims Brief Introduction
Scrim is a cost-effective reinforcing fabric made from continuous filament yarn in an open mesh construction. The laid scrim manufacturing process chemically bonds non-woven yarns together, enhancing the scrim with unique characteristics.
Ruifiber makes special scrims to order for specific usages and applications. These chemically bonded scrims permit our customers to reinforce their products in a very economical manner. They are designed to satisfy our customers' requests, and to be highly compatible with their process and product.
Polyester Laid Scrims Characteristics
High Strength, Low Elongation: The laid scrim construction provides balanced, multi-directional strength with minimal stretch, preventing the adhesive tape from deforming or stretching under load.
Lightweight & Flexible: The CP2.5 * 5PH specification indicates a lightweight, thin fabric that adds reinforcement without significantly increasing the overall thickness or stiffness of the final tape, maintaining excellent conformability.
Fatigue Resistant: Made from polyester, it offers excellent resistance to repeated bending and stress, making it ideal for tapes used in dynamic environments or on moving parts.
Internal Reinforcement Core: Acts as the load-bearing backbone that carries mechanical stresses, preventing adhesive ooze (squeeze-out) and ensuring the tape fails cohesively rather than by tearing.
The Polyester Laid Scrim CP2.5 * 5PH is the critical, yet often unseen, component that enables double-sided tapes to achieve high strength and reliability. By providing a stable, tear-resistant internal grid, it transforms simple adhesive layers into durable, engineered bonding solutions for a wide range of industrial and commercial applications.
Polyester Laid Scrims Data Sheet
|
Item No. |
CP2.5*5PH |
CP2.5*10PH |
CP4*6PH |
CP8*12PH |
|
Mesh Size |
2.5 x 5mm |
2.5 x 10mm |
4 x 6mm |
8 x 12.5mm |
|
Weight (g/m2) |
5.5-6g/m2 |
4-5g/m2 |
7.8-10g/m2 |
2-2.5g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm etc. The regular supply grams are 3g, 5g, 8g, 10g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Polyester Laid Scrims Application
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
