Fiberglass mesh fabric Laid Scrims for wood flooring reinforcement 6.25*12.5mm

Short Description:

Roll Width: 200 to 2500 mm

Roll Length:: Up to 50 000 m

Yarns Type:: Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Construction:: Square, tri-directional

Patterns:: From 0.8 yarns/cm to 3 yarns/cm

Bonding:: PVOH, PVC, Acrylic, customized

Send email to us Download as PDF

Product Detail

Product Tags

Fiberglass Laid Scrims Brief Introduction

This product is a Fiberglass Laid Scrim characterized by a 6.25x12.5mm rectangular mesh. It is engineered as a high-performance, open mesh reinforcement fabric specifically designed for applications such as wood flooring and PVC flooring reinforcement. Manufactured from continuous glass filaments that are chemically bonded, it provides exceptional dimensional stability, tensile strength, and compatibility with various composite materials, making it a key component in enhancing the durability and flatness of floor coverings.

Fiberglass Laid Scrims Characteristics

High Strength & Light Weight: It delivers substantial tensile strength and tear resistance while maintaining a lightweight profile. This high strength-to-weight ratio allows it to significantly reinforce composite structures without adding excessive mass.

Superior Material Properties: The fabric inherits the inherent advantages of fiberglass, including high tenacity, excellent dimensional stability, low shrinkage, low elongation, alkali resistance, fire resistance, and corrosion resistance.

Optimized Rectangular Mesh (6.25x12.5mm): The rectangular mesh structure provides balanced reinforcement in two primary directions. The specific 6.25x12.5mm size offers an optimal balance between fabric density for strength and openness for thorough adhesive or resin penetration during the lamination process.

Fiberglass Laid Scrims Data Sheet

Item No.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Mesh Size	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Weight (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Fiberglass Laid Scrims Application

a) Aluminum Foil Composite

Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.

b) PVC Flooring

PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.

c) None-woven category products reinforced

None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.