Ákwà e ji ákwà fiberglass mee nke a na-akpọ Laid Scrims maka ime ka ala osisi sie ike 6.25*12.5mm

Nkọwa Dị Mkpirikpi:

Obosara Mpịakọta:200 ruo 2500 mm

Ogologo Mpịakọta::Ruo mita 50,000

Ụdị eriri::Iko, Polyester, Carbon, Owu, Flax, Jute, Viscose, Kevlar, Nomex,

Owuwu::Akụkụ anọ, ụzọ atọ

Ụkpụrụ::Site na eriri 0.8/cm ruo eriri 3/cm

Njikọta::PVOH, PVC, Acrylic, ahaziri ahazi

Zitere anyị ozi-e Budata ya dị ka PDF

Nkọwa Ngwaahịa

Akara Ngwaahịa

Okwu Mmalite Dị Mkpirisi Fiberglass Laid Scrims

Ngwaahịa a bụ Fiberglass Laid Scrim nke e ji eriri akụkụ anọ nke 6.25x12.5mm mee. E mepụtara ya dị ka ákwà mkpuchi mesh dị elu nke e mere kpọmkwem maka ojiji dịka ala osisi na nkwado ala PVC. E ji eriri iko na-aga n'ihu nke ejikọtara na kemịkalụ mepụta ya, ọ na-enye nkwụsi ike pụrụ iche, ike nrụgide, na ndakọrịta na ihe dị iche iche mejupụtara ya, na-eme ka ọ bụrụ ihe dị mkpa n'ime ka mkpuchi ala dịkwuo ike ma dị larịị.

Njirimara nke Fiberglass Laid Scrims

Ike dị elu na ibu dị mfe:Ọ na-enye ike nrụgide dị ukwuu na iguzogide ndọda ebe ọ na-ejigide profaịlụ dị fechaa. Oke ike na ịdị arọ a dị elu na-enye ya ohere ime ka ihe owuwu mejupụtara sie ike nke ukwuu n'etinyeghị oke ibu.

Njirimara Ihe Kachasị Elu:Ákwà ahụ na-eketa uru dị na fiberglass, gụnyere ike dị elu, nkwụsi ike dị mma, obere mkpụkọ, obere ogologo, iguzogide alkali, iguzogide ọkụ, na iguzogide nchara.

Nhazi akụkụ anọ kachasị mma (6.25x12.5mm):Nhazi eriri akụkụ anọ ahụ na-enye nkwado kwụsiri ike n'akụkụ abụọ bụ isi. Nha 6.25x12.5mm kpọmkwem na-enye nguzozi kacha mma n'etiti njupụta ákwà maka ike na oghere maka nrapado zuru oke ma ọ bụ resin n'oge usoro ịkpụcha.

Mpempe akwụkwọ data nke Fiberglass Laid Scrims

Nọmba ihe.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Nha nha nha	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Ibu (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

A na-enye ihe nkwado a na-anaghị akpa ákwà na ihe mkpuchi a na-akpụ akpụ mgbe niile bụ 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm wdg. Gram nke ihe a na-enye mgbe niile bụ 6.5g, 8g, 13g, 15.5g, wdg.Site n'ike dị elu na ibu dị mfe, enwere ike ijikọ ya nke ọma na ihe fọrọ nke nta ka ọ bụrụ ihe ọ bụla, ogologo mpịakọta ọ bụla nwere ike ịbụ mita 10,000.

Ngwa E ji Faiba glaasi mee ihe

a) Ngwakọta Aluminom Foil

A na-ejikarị ihe e ji ákwà a kpara akpa nke a na-akpọ nove-woven laid scrim eme ihe n'ọtụtụ ebe n'ụlọ ọrụ aluminom foil. Ọ nwere ike inyere aka imepụta ihe iji mepụta arụmọrụ mmepụta ya n'ihi na ogologo mpịakọta ahụ nwere ike iru mita 10000. Ọ na-emekwa ka ngwaahịa emechara ka mma.

E ji ákwà e ji fiberglass mee kpuchie ya-02

b) Ala PVC

A na-eji PVC eme ala PVC, tinyekwara ihe ndị ọzọ dị mkpa n'oge a na-emepụta ya. A na-emepụta ya site na nhazi, ọganihu extrusion ma ọ bụ ọganihu mmepụta ndị ọzọ, a na-ekewa ya n'ime ala mpempe akwụkwọ PVC na ala PVC Roller. Ugbu a, ụlọ ọrụ mmepụta ihe niile dị mkpa n'ime obodo na mba ofesi na-etinye ya dị ka akwa nkwado iji zere njikọ ma ọ bụ mkpụkọ dị n'etiti iberibe, nke na-akpata mmụba okpomọkụ na mkpụmkpụ nke ihe.

c) Ngwaahịa ụdị nke a na-akpaghị kpara nke ọma

A na-ejikarị ákwà e ji aka kpaa nke a na-akpaghị akpa eme ihe dị ka ákwà e ji aka kpaa nke a na-akpaghị akpa, dị ka ákwà fiberglass, ute polyester, ákwà nhicha aka, na ụfọdụ nsọtụ elu, dị ka akwụkwọ ahụike. Ọ nwere ike imepụta ngwaahịa e ji aka kpaa nke a na-akpaghị akpa nke nwere ike ịgbatị elu, ebe ọ na-agbakwụnye obere ibu.