Fiberglass Scrims For Flooring 10x10mm PVOH Coating

Short Description:

Roll Width: 200 to 2500 mm

Roll Length:: Up to 50 000 m

Yarns Type:: Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Construction:: Square, tri-directional

Patterns:: From 0.8 yarns/cm to 3 yarns/cm

Bonding:: PVOH, PVC, Acrylic, customized

Send email to us Download as PDF

Product Detail

Product Tags

Fiberglass Laid Scrims Brief Introduction

This product is a Fiberglass Laid Scrim characterized by a 10x10mm square mesh and a Polyvinyl Alcohol (PVOH) coating. It is engineered as a high-performance reinforcement fabric specifically for the flooring industry. Made from chemically bonded continuous glass filaments, it provides exceptional dimensional stability, strength, and compatibility with various flooring matrices. The product is designed to be integrated as a key stabilizing layer within composite flooring materials to prevent deformation and enhance durability.

Fiberglass Laid Scrims Characteristics

Optimized 10x10mm Mesh Structure: The square mesh provides balanced, multi-directional reinforcement, ensuring uniform distribution of stress and resistance to forces that could cause flooring to crack or distort.

PVOH Coating for Enhanced Performance: The PVOH coating ensures excellent adhesion within composite structures, is environmentally friendly, and contributes to the product's overall stability and water resistance.

Superior Material Properties: Inherits the inherent advantages of fiberglass, including high tenacity, excellent dimensional stability, low shrinkage, low elongation, alkali resistance, fire resistance, and corrosion resistance.

Lightweight yet High Strength: With a weight of approximately 8-9 grams per square meter, it delivers significant reinforcement and tear resistance while adding minimal mass to the final flooring product, crucial for maintaining a low profile and efficient material usage.

Fiberglass Laid Scrims Data Sheet

Item No.	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Mesh Size	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Weight (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Fiberglass Laid Scrims Application

a) Aluminum Foil Composite

Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.

b) PVC Flooring

PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.

c) None-woven category products reinforced

None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.