Thermoplastic Polyester Laid Scrim 8x8mm Medical Health Hot Melt Adhesive Coating
Polyester Laid Scrims Brief Introduction
Polyester Laid Scrims Characteristics
Medical-Grade Suitability: The polyester base material and the adhesive system are selected for compatibility with hygiene-sensitive applications. The product is designed to meet the demands of medical environments, offering reliability and consistency.
Optimized 8x8mm Mesh for Medical Use: The 8x8mm open mesh structure provides a balance of strength and openness. It contributes to the composite's structural integrity while potentially allowing for fluid management (wicking or absorption) in certain absorbent product designs.
Polyester Laid Scrims Application Scenarios
It is laminated as a key reinforcing and bonding layer within multi-layer medical absorbent products. Its primary application is in the manufacture of:
Medical Blood-Absorbing Paper/Tissue: Used in surgical settings, wound care, or as underpads to absorb fluids, where the scrim adds tear resistance and helps bind the absorbent core layers together.
Sanitary and Healthcare Non-Woven Composites: Integrated into products requiring a combination of softness, strength, and liquid handling capabilities.
Polyester Laid Scrims Data Sheet
|
Item No. |
CP2.5*5PH |
CP2.5*10PH |
CP4*6PH |
CP8*12PH |
|
Mesh Size |
2.5 x 5mm |
2.5 x 10mm |
4 x 6mm |
8 x 12.5mm |
|
Weight (g/m2) |
5.5-6g/m2 |
4-5g/m2 |
7.8-10g/m2 |
2-2.5g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm etc. The regular supply grams are 3g, 5g, 8g, 10g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Polyester Laid Scrims Application
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
Due to light weight, high strength, low shrinkage/elongation, corrosion preventive, laid scrims offers tremendous value compared to conventional material concepts. And it's easily to laminate with many kinds of materials, this makes it has an extensive fields of applications.
Address
Head office Add: BLDG#26,MAX Technology Park Phase II,Baoshan District,Shanghai China
Factory Add: Shanghai Ruifiber (Fengxian) Industry Park, Fengxian, Xuzhou, China
Phone
Sales: 0086-186 2191 5640
Support: 0086-21-5665 9615
Hours
24-hour Service
