Thermoplastic Polyester Laid Scrim 8x8mm Ahụike Ahụike Na-ekpo ọkụ na-agbaze nrapado mkpuchi

Ihe mkpuchi a na-akpọ Thermoplastic Polyester Laid Scrim 8x8mm Ahụike Ahụike Ahụike Na-ekpo ọkụ nke na-agbaze agbaze Foto a na-egosi

Nkọwa Dị Mkpirikpi:

Obosara Mpịakọta:200 ruo 2500 mm

Ogologo Mpịakọta::Ruo mita 50,000

Ụdị eriri::Iko, Polyester, Carbon, Owu, Flax, Jute, Viscose, Kevlar, Nomex,

Owuwu::Akụkụ anọ, ụzọ atọ

Ụkpụrụ::Site na eriri 0.8/cm ruo eriri 3/cm

Njikọta::PVOH, PVC, Acrylic, ahaziri ahazi

Zitere anyị ozi-e Budata ya dị ka PDF

Nkọwa Ngwaahịa

Akara Ngwaahịa

Okwu Mmalite Dị Mkpirikpi nke Polyester Laid Scrims

Ngwaahịa a bụ nke a na-akpọ Thermoplastic Polyester Laid Scrim nke e mere maka ụlọ ọrụ ahụike na ahụike. O nwere ihe mkpuchi 8x8mm ma kpuchie ya na ihe na-eme ka ọ gbazee ọkụ. E mepụtara ya dịka ihe nkwado na njikọ, a na-ejikwa ya kpọmkwem n'imepụta ngwaahịa ahụike na-amịkọrọ ọbara, dị ka akwụkwọ na-amịkọrọ ọbara na ihe ndị ọzọ dị ọcha, ebe ike, ịdị ọcha, na ihe e ji ehicha ihe dị mkpa.

Njirimara Polyester Laid Scrims

Mkpuchi Mgbakwunye Na-ekpo Ọkụ (HMA):Mkpuchi thermoplastic hot melt na-enye elu njikọ dị irè, dị ọcha, ma na-arụ ọrụ ngwa ngwa. Ọ na-enye ohere ka e jiri akwa ndị ọzọ (dịka ọmụmaatụ, ákwà ndị a na-akpaghị ákwà, anụ ahụ) kpuchie scrim ahụ ngwa ngwa n'okpuru okpomọkụ na nrụgide, na-emepụta ngwakọta siri ike, nke dị n'ime ya na-enweghị mkpa maka ihe nrapado mmiri mmiri.

Ọkwa Ahụike:A na-ahọrọ ihe e ji eme polyester na sistemụ gluu maka ndakọrịta na ojiji ndị na-emetụta ịdị ọcha. Emebere ngwaahịa a ka o mezuo ihe achọrọ na gburugburu ebe ahụike, na-enye ntụkwasị obi na ịdịgide.

Ngwakọta 8x8mm kachasị mma maka ojiji ahụike:Nhazi mesh 8x8mm mepere emepe na-enye nguzozi nke ike na oghere. Ọ na-enye aka na iguzosi ike n'ezi ihe nke ihe mejupụtara ahụ ebe o nwere ike inye ohere maka njikwa mmiri (ịcha ma ọ bụ ịmịkọrọ) na ụfọdụ atụmatụ ngwaahịa na-amịkọrọ mmiri.

Ihe ngosi Ngwa Polyester Laid Scrims

Ojiji Mbụ: Mmesi Ike na Ngwaahịa Ọgwụ Na-amịkọrọ Mmiri

A na-ete ya dị ka ihe na-eme ka ihe sie ike ma jikọta ọnụ n'ime ngwaahịa ọgwụ na-amịkọrọ ọtụtụ oyi akwa. Isi ihe e ji eme ya bụ imepụta:

Akwụkwọ/Akwara Ahụike Na-amịkọrọ Ọbara: A na-eji ya eme ihe n'ebe a na-awa ahụ, nlekọta ọnya, ma ọ bụ dị ka ihe mkpuchi dị n'okpuru iji mịpụta mmiri mmiri, ebe scrim na-agbakwụnye ike ndọda ma na-enyere aka ijikọ akwa isi mmiri mmiri ọnụ.

Ngwakọta Ndị Na-abụghị nke A kpara Akpụ: A na-etinye ha n'ime ngwaahịa ndị chọrọ njikọta nke ịdị nro, ike, na ikike ijikwa mmiri mmiri.

Mpempe akwụkwọ data Polyester Laid Scrims

Nọmba ihe.	CP2.5*5PH	CP2.5*10PH	CP4*6PH	CP8*12PH
Nha nha nha	2.5 x 5mm	2.5 x 10mm	4 x 6mm	8 x 12.5mm
Ibu (g/m2)	5.5-6g/m2	4-5g/m2	7.8-10g/m2	2-2.5g/m2

A na-enye ihe nkwado a na-anaghị akpa ákwà na ihe mkpuchi a na-akpụ akpụ mgbe niile bụ 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm wdg. Gram ndị a na-enye mgbe niile bụ 3g, 5g, 8g, 10g, wdg.Site n'ike dị elu na ibu dị mfe, enwere ike ijikọ ya nke ọma na ihe fọrọ nke nta ka ọ bụrụ ihe ọ bụla, ogologo mpịakọta ọ bụla nwere ike ịbụ mita 10,000.

Ngwa Polyester Laid Scrims

a) Ngwakọta Aluminom Foil

A na-ejikarị ihe e ji ákwà a kpara akpa nke a na-akpọ nove-woven laid scrim eme ihe n'ọtụtụ ebe n'ụlọ ọrụ aluminom foil. Ọ nwere ike inyere aka imepụta ihe iji mepụta arụmọrụ mmepụta ya n'ihi na ogologo mpịakọta ahụ nwere ike iru mita 10000. Ọ na-emekwa ka ngwaahịa emechara ka mma.

E ji ákwà e ji fiberglass mee kpuchie ya-02

b) Ala PVC

A na-eji PVC eme ala PVC, tinyekwara ihe ndị ọzọ dị mkpa n'oge a na-emepụta ya. A na-emepụta ya site na nhazi, ọganihu extrusion ma ọ bụ ọganihu mmepụta ndị ọzọ, a na-ekewa ya n'ime ala mpempe akwụkwọ PVC na ala PVC Roller. Ugbu a, ụlọ ọrụ mmepụta ihe niile dị mkpa n'ime obodo na mba ofesi na-etinye ya dị ka akwa nkwado iji zere njikọ ma ọ bụ mkpụkọ dị n'etiti iberibe, nke na-akpata mmụba okpomọkụ na mkpụmkpụ nke ihe.

c) Ngwaahịa ụdị nke a na-akpaghị kpara nke ọma

A na-ejikarị ákwà e ji aka kpaa nke a na-akpaghị akpa eme ihe dị ka ákwà e ji aka kpaa nke a na-akpaghị akpa, dị ka ákwà fiberglass, ute polyester, ákwà nhicha aka, na ụfọdụ nsọtụ elu, dị ka akwụkwọ ahụike. Ọ nwere ike imepụta ngwaahịa e ji aka kpaa nke a na-akpaghị akpa nke nwere ike ịgbatị elu, ebe ọ na-agbakwụnye obere ibu.

E ji ákwà e ji fiberglass mee kpuchie ya-04

E ji ákwà e ji fiberglass mee kpuchie ya-05

d) PVC Tarpaulin

Enwere ike iji scrim Laid dị ka ihe ndị bụ isi iji mepụta mkpuchi gwongworo, ihe mkpuchi ọkụ, ọkọlọtọ, ákwà ụgbọ mmiri wdg.

E ji ákwà e ji fiberglass mee kpuchie ya-06

E ji ákwà e ji fiberglass mee kpuchie ya-07

E ji ákwà e ji fiberglass mee kpuchie ya-08

N'ihi ịdị arọ dị mfe, ike dị elu, obere mbelata/ogologo, mgbochi nchara, ihe mkpuchi e ji ígwè rụọ na-enye nnukwu uru ma e jiri ya tụnyere echiche ihe ndị e ji ígwè mee. Ọ dịkwa mfe iji ọtụtụ ihe mee ihe, nke a na-eme ka o nwee ọtụtụ ebe a na-eji ya eme ihe.

Ndị Mmekọ Mba Nile Gị

Adreesị

Isi ụlọ ọrụ Tinye: BLDG#26, MAX Technology Park Phase II, Baoshan District, Shanghai China
Tinye ụlọ ọrụ: Shanghai Ruifiber (Fengxian) Industry Park, Fengxian, Xuzhou, China