Hot-melt Adhesive Coating Binder Polyester PET Laid Scrim Netting 5x5mm

Short Description:

Roll Width: 200 to 2500 mm

Roll Length:: Up to 50 000 m

Yarns Type:: Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Construction:: Square, tri-directional

Patterns:: From 0.8 yarns/cm to 3 yarns/cm

Bonding:: PVOH, PVC, Acrylic, customized

Send email to us Download as PDF

Product Detail

Product Tags

Polyester Laid Scrims Brief Introduction

This product is a Polyester (PET) Laid Scrim featuring a 5x5mm mesh and coated with a Hot-melt Adhesive (HMA) binder. It is engineered as a ready-to-bond reinforcement fabric that combines the structural benefits of a polyester scrim with the instant adhesion provided by the thermoplastic coating. This design offers a highly efficient and clean solution for laminating and reinforcing a wide range of composite materials, simplifying the manufacturing process for end-users.

Polyester Laid Scrims Characteristics

Hot-melt Adhesive (HMA) Coating: The key feature is the thermoplastic adhesive coating, which provides an instant, clean, and solvent-free bonding surface. It allows for rapid lamination with other materials (like foil, non-wovens, or fabrics) under heat and pressure, eliminating the need for separate adhesive application and curing steps.

Optimized 5x5mm Mesh Structure: The balanced 5x5mm open mesh provides good dimensional stability and tensile strength while allowing for efficient adhesive flow and bonding during the lamination process.

Polyester (PET) Base Advantages: Inherits the beneficial properties of polyester, including high strength, tear resistance, low shrinkage/elongation, and good chemical resistance. It is also lightweight, contributing to the final product's performance-to-weight ratio.

Polyester Laid Scrims Data Sheet

Item No.	CP2.5*5PH	CP2.5*10PH	CP4*6PH	CP8*12PH
Mesh Size	2.5 x 5mm	2.5 x 10mm	4 x 6mm	8 x 12.5mm
Weight (g/m2)	5.5-6g/m2	4-5g/m2	7.8-10g/m2	2-2.5g/m2

The regular supply of non-woven reinforcement and laminated scrim is 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm etc. The regular supply grams are 3g, 5g, 8g, 10g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Polyester Laid Scrims Application

a) Aluminum Foil Composite

Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.

b) PVC Flooring

PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.

c) None-woven category products reinforced

None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.

Due to light weight, high strength, low shrinkage/elongation, corrosion preventive, laid scrims offers tremendous value compared to conventional material concepts. And it's easily to laminate with many kinds of materials, this makes it has an extensive fields of applications.