Single Yarn Polyester Laid Scrim Netting Mesh 4x6mm for Adhesive Tape 76Dx150D

Short Description:

Roll Width: 200 to 2500 mm

Roll Length:: Up to 50 000 m

Yarns Type:: Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex,

Construction:: Square, tri-directional

Patterns:: From 0.8 yarns/cm to 3 yarns/cm

Bonding:: PVOH, PVC, Acrylic, customized

Send email to us Download as PDF

Product Detail

Product Tags

Polyester Laid Scrims Brief Introduction

This product is a specialized Polyester Laid Scrim designed specifically for the adhesive tape manufacturing industry. It features a 4x6mm mesh constructed from a unique 76Dx150D single-yarn composition, where the yarns in the two primary directions have different thicknesses (Denier). This engineered structure is optimized to provide high-performance, lightweight reinforcement for various adhesive tapes, enhancing their tensile strength, dimensional stability, and handling characteristics.

Polyester Laid Scrims Characteristics

Single-Yarn Construction (76Dx150D): The use of a single, continuous filament in each direction, with differentiated deniers (76D in one direction, 150D in the crossing direction), creates a tailored strength profile. This allows manufacturers to optimize the tape’s performance for specific directional stresses, achieving an optimal balance between material usage, cost, and strength.

Optimized 4x6mm Mesh for Tapes: The rectangular 4x6mm mesh provides a balance between openness (for excellent adhesive penetration and bonding) and fabric density (for effective multi-directional reinforcement). It is designed to add critical stability and tear resistance to thin-gauge tape backings.

High Strength & Light Weight: Despite its reinforcing power, this laid scrim is inherently lightweight. The data sheet indicates that similar products (e.g., CP4 * 6PH) have a weight of approximately 7.8-10 g/m², allowing it to significantly enhance tape performance with minimal added thickness and mass, which is crucial for applications requiring thin, flexible tapes.

Low Shrinkage & Anti-Curl Properties: Inherits the key advantages of polyester laid scrims, including very low shrinkage and elongation. This is critical for adhesive tapes to prevent edge lift (curling) after application and to maintain dimensional stability under varying temperatures.

Provides the necessary tensile strength and dimensional stability for thin, high-bond tapes used in electronics assembly, signage mounting, and industrial bonding, preventing stretch and tear during application and use.

Can serve as a complementary reinforcement or as a key component in tapes that require exceptional strength and durability for bundling, palletizing, and securing heavy loads.

Polyester Laid Scrims Data Sheet

Item No.	CP2.5*5PH	CP2.5*10PH	CP4*6PH	CP8*12PH
Mesh Size	2.5 x 5mm	2.5 x 10mm	4 x 6mm	8 x 12.5mm
Weight (g/m2)	5.5-6g/m2	4-5g/m2	7.8-10g/m2	2-2.5g/m2

The regular supply of non-woven reinforcement and laminated scrim is 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm etc. The regular supply grams are 3g, 5g, 8g, 10g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Polyester Laid Scrims Application

Single Yarn Polyester Laid Scrim (4x6mm, 76Dx150D) is a precision-engineered reinforcement fabric that addresses the specific performance demands of the adhesive tape industry. By utilizing a differentiated single-yarn construction to tailor directional strength and an optimized mesh for balance and penetration, it enables tape manufacturers to produce products that are thinner, stronger, more stable, and resistant to curling. This translates to more reliable performance in critical bonding and mounting applications.

a)Double-Sided and Transfer Tapes

b) Heavy-Duty Filament Tapes

Can serve as a complementary reinforcement or as a key component in tapes that require exceptional strength and durability for bundling, palletizing, and securing heavy loads.

c) Specialty Industrial Tapes

Used in applications where a combination of flexibility, conformability, and reliable strength is required, and where minimizing tape thickness is a priority.

Due to light weight, high strength, low shrinkage/elongation, corrosion preventive, laid scrims offers tremendous value compared to conventional material concepts. And it's easily to laminate with many kinds of materials, this makes it has an extensive fields of applications.