Fiberglass Scrims that can be easily incorporated
Fiberglass Laid Scrims Brief Introduction
A cost-effective, open-mesh reinforcement fabric built on continuous filament yarn in a chemically bonded, flat-laid construction — this fiberglass laid scrim is positioned as a "drop-in" tensile grid that converters can easily incorporate into foil, non-woven, PVC, and composite stacks without reworking their process. Ruifiber makes these scrims to order for specific usages and applications; the chemically bonded, non-woven-yarn construction gives the scrim lightweight, high strength, low shrinkage/low elongation, and corrosion resistance, and it is designed to be highly compatible with the customer's process and product.
Fiberglass Laid Scrims Characteristics
Easily-Incorporated Glass Properties: Dimensional stability, tensile strength, alkali resistance, tear resistance, fire resistance, anti-microbial properties, water resistance — the E-glass platform survives heat, humidity, and alkaline environments common to foil insulation, flooring, and non-woven laminates, while the "easily incorporated" design point means the scrim bonds with almost any host material without special surface prep.
Long Rolls for Efficient Incorporation: Roll width 200–2,500 mm; regular supply 10,000 m/roll (platform up to 50,000 m). Fewer splices per shift on high-speed laminating, coating, and slitting lines — fewer weak spots, better batch appearance, directly supporting the page note that the scrim "permits our customers to reinforce their products in a very economical manner."
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass Laid Scrims Application
Primary Use: Platform-Level "Easily Incorporated" Reinforcement for Converters
The core positioning of this fiberglass laid scrim is as the drop tensile grid that can be easily incorporated into a converter's existing laminating, calendering, coating, or wrapping line — foil–kraft, non-woven mats, PVC carriers, technical textiles, and prepreg stacks alike. It is laminated into the host stack to upgrade mechanical performance at very low GSM, turning fragile or limp substrates into composites that survive handling, converting, and in-service loads — all without forcing the converter to reconfigure chemistry or tooling.
Secondary Applications
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
