Fiberglass net fabric Laid Scrims for wood flooring
Fiberglass Laid Scrims Brief Introduction
This product is a Fiberglass Laid Scrim, a high-performance reinforcement fabric engineered specifically as a dimensional-stabilizing layer for wood flooring systems — including engineered wood, laminate, SPC/WPC composite flooring, and parquet overlays. It is manufactured from continuous E-glass filament yarns arranged in a flat-laid, open-mesh construction and chemically bonded at the intersections (PVOH / PVC / Acrylic or customized binder). Unlike woven fiberglass cloth, the laid scrim keeps yarns in a straight, low-crimp path, delivering multi-directional tensile support while adding minimal weight and thickness — which matters for wood flooring where the decorative veneer or wear layer is often only 2–4 mm thick. The scrim is laminated between the core board and the backing layer, or sandwiched into the balancing layer of engineered wood, to suppress expansion/contraction differentials between face and back, reduce joint gapping or edge lifting, and improve the floor's tolerance to seasonal humidity swings.
Fiberglass Laid Scrims Characteristics
Dimensional Stability for Wood-Substrate Systems: Wood and wood-plastic composites naturally expand/contract with humidity and temperature. The laid scrim acts as a low-profile "invisible skeleton" that restrains differential movement between face and back, reducing the risk of joint gaping, edge cupping, and lock-system stress failure in floating or glued-down installations.
High Tenacity + Low Elongation: Continuous E-glass filaments provide high tensile strength with very low creep under sustained load — important because wood flooring lives under constant static load (furniture) plus dynamic load (foot traffic). The scrim helps the floor "remember" its laid position.
Flexible Yet Tear-Resistant & Heat-Resistant: Despite the glass yarn, the open-laid construction remains flexible enough to go through calender lamination or roll-pressing with the wood core; bonded nodes give tear-initiation resistance during handling and click-lock assembly, and the scrim itself does not shrink back on cooling, helping avoid post-lamination curl.
Alkali Resistance, Corrosion Resistance & Fire Resistance: E-glass base gives inherent moisture and alkali tolerance (relevant when flooring sits over concrete subfloor with residual alkalinity), plus non-combustible backbone supporting the floor system's overall fire strategy.
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass Laid Scrims Application
Primary Use: Stabilizing Reinforcement for Wood Flooring Systems
The core and specialized application of this fiberglass laid scrim is as a dimensional-stabilizing interlayer or backing reinforcement in engineered wood, laminate, SPC/WPC, and parquet flooring. It is laminated between the core and backing, or embedded into the balancing structure, to:
Prevent Joint Gaping & Edge Lifting
The scrim restrains differential expansion between face and back caused by humidity changes, significantly reducing gaps and edge curling that compromise floor appearance and function.
Maintain Flatness & Prevent Cupping/Crowning
Multi-directional tensile from the laid scrim keeps each plank flat over time, resisting bowing or dishing under uneven moisture absorption or static loads.
Enhance Lock-System Reliability
By sharing shear stress between core and backing, the scrim reduces stress concentration on click-lock edges, preventing breakage during installation and long-term use.
Secondary Applications
Due to its versatile reinforcement properties, this fiberglass laid scrim is also extensively applied in other industrial sectors per the product page
Aluminum Foil Composite
Widely used in the aluminium foil industry; roll lengths up to 10,000 m improve production efficiency and give finished products better appearance.
Non-Woven Category Reinforcement
Applied to fiberglass tissue, polyester mat, wipes, and top-end items such as medical paper — increases tensile strength with minimal unit weight addition.
