Fiberglass stretch mesh fabric Laid Scrims for aluminum foil thermal insulation for Middle East Countries
Fiberglass stretch mesh fabric Laid Scrims Introduction
This product is a Fiberglass Laid Scrim (stretch-mesh variant), a cost-effective, open-mesh reinforcement fabric engineered as the "S" layer in aluminum foil thermal insulation composites for Middle East markets. It is made from continuous E-glass filament yarns in a chemically bonded, flat-laid open mesh (square or tri-directional), with binder options (PVOH, PVC, Acrylic, customized) to match foil–kraft / foil–tissue laminating lines. The "stretch-mesh" construction gives the scrim slightly improved drapability over standard square scrim while retaining glass-grade dimensional stability, alkali resistance, and fire resistance — suited to building wrap, HVAC duct insulation, and roof/under-deck facing in Gulf climates. Configurable: roll width 200–2,500 mm, roll length up to 10,000 m, yarn types (Glass led, also Polyester, Carbon, Kevlar, Nomex, etc.), construction square / tri-directional, patterns 0.8–3 yarns/cm.
Fiberglass stretch mesh fabric Laid Scrims Characteristics
Foil-Insulation Grade Glass Properties: High tenacity, dimensional stability, flexibility, low shrinkage, low elongation, alkali resistance, fire resistance, corrosion resistance — matches both foil–kraft and foil–fiberglass-tissue stacks, and survives heat, humidity, and alkaline concrete substrates common to Middle East building wrap and duct insulation.
High Strength & Light Weight: Page data: CF12.5×12.5PH (12.5×12.5mm, 6.2–6.6 g/m²), CF10×10PH (10×10mm, 8–9 g/m²), CF6.25×6.25PH (6.25×6.25mm, 12–13.2 g/m²), CF5×5PH (5×5mm, 15.2 g/m²); regular supply mesh also 12.5×6.25mm, regular supply grams 6.5g / 8g / 13g / 15.5g etc. High strength-to-weight, fully bondable with almost any material.
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass stretch mesh fabric Laid Scrims Application
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
