Fiberglass Mesh Laid Scrim Netting 3x8x8mm PVOH Binder 55gsm
Fiberglass Laid Scrims Brief Introduction
Fiberglass Laid Scrims Characteristics
PVOH Binder Advantage: The water-based PVOB binder ensures excellent resin wet-out, is environmentally friendly, and facilitates strong bonding with materials like aluminum foil, PVC, and non-wovens.
Balanced Mesh Structure: The 3x8x8mm mesh offers a balance between open area for good impregnation and fabric density for effective multi-directional reinforcement.
Superior Material Properties: Inherits the benefits of glass fiber, including high tenacity, alkali resistance, low shrinkage, fire resistance, and dimensional stability.
Application Scenarios
Used as the reinforcing core in aluminum foil laminates for HVAC duct wrapping and insulation materials. Its long roll length (up to 10,000m as mentioned) improves production efficiency and product appearance.
Primary Use 2: Stabilizing Layer in PVC Flooring
Embedded as a reinforcement layer in PVC sheet or roll flooring to counteract thermal expansion and contraction, preventing gaps or bulging between floor pieces.
Primary Use 3: Reinforcement for Non-Woven Products
Used to reinforce various non-woven fabrics (e.g., fiberglass tissue, polyester mat, wipes, medical paper), significantly increasing tensile strength with minimal weight addition.
Primary Use 4: Substrate for Coated Fabrics (e.g., PVC Tarpaulin)
Serves as the base reinforcing material in the production of truck covers, awnings, banners, and sailcloth, providing durability and tear resistance.
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass Laid Scrims Application
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
