Ramin Fiberglass Ramin Scrim Mai Laid 3x8x8mm PVOH Mai ɗaurewa 55gsm

Fiberglass Mesh Laid Scrim Netting 3x8x8mm PVOH Binder 55gsm Fitaccen Hoto

Takaitaccen Bayani:

Faɗin Naɗi:200 zuwa 2500 mm

Tsawon Naɗi::Har zuwa mita 50,000

Nau'in Zare::Gilashi, Polyester, Carbon, Auduga, Flax, Jute, Viscose, Kevlar, Nomex,

Gine-gine::Murabba'i, mai kusurwa uku

Samfura::Daga zare 0.8/cm zuwa zare 3/cm

Haɗawa::PVOH, PVC, Acrylic, na musamman

Aika mana imel Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwa Takaitaccen Bayani Game da Fiberglass Laid Scrims

Wannan samfurin Fiberglass Laid Scrim ne wanda aka yi wa ado da tsarin raga mai girman 3x8x8mm da kuma nauyin gram 55 a kowace murabba'in mita (gsm). Yana amfani da manne mai kariya daga muhalli na Polyvinyl Alcohol (PVOH). An tsara wannan kayan a matsayin wani abu mai ƙarfi, wanda ke ba da ƙarfi mai yawa, kwanciyar hankali, da kuma dacewa mai kyau da matrices daban-daban. Ya dace da sarrafa kansa ta atomatik a cikin dogayen nadi (har zuwa mita 50,000) kuma ana samar da shi a cikin faɗin da za a iya gyarawa daga 200 zuwa 2500 mm.

Halayen Fiberglass Laid Scrims

Mai Sauƙi & Babban Aiki:Tare da nauyin 55gsm kawai, yana ba da ƙarin ƙarfi mai mahimmanci tare da ƙaramin ƙarin nauyi, yana ba da gudummawa ga samar da haɗakar ƙarshen mai sauƙi.

Amfanin Binder na PVOH:Maƙallin PVOB mai ruwa yana tabbatar da cewa yana da kyau a jika resin, yana da kyau ga muhalli, kuma yana sauƙaƙa haɗin gwiwa mai ƙarfi da kayan aiki kamar aluminum foil, PVC, da waɗanda ba a saka ba.

Tsarin Ramin Daidaitacce:Ramin 3x8x8mm yana ba da daidaito tsakanin wurin buɗewa don kyakkyawan shigarwa da yawan yadi don ingantaccen ƙarfafawa mai sassauƙa da yawa.

Kayayyakin Kayan Aiki Mafi Kyau:Yana gaji fa'idodin zare na gilashi, gami da juriya mai yawa, juriyar alkali, ƙarancin raguwa, juriyar wuta, da kwanciyar hankali.

Yanayin Aikace-aikace

Babban Amfani 1: Ƙarfafawa ga Haɗaɗɗun Aluminum Foil

Ana amfani da shi azaman tushen ƙarfafawa a cikin laminates na aluminum foil don naɗe bututun HVAC da kayan rufi. Tsawonsa mai tsayi (har zuwa mita 10,000 kamar yadda aka ambata) yana inganta ingancin samarwa da bayyanar samfur.

Babban Amfani na 2: Daidaita Layer a cikin bene na PVC

An saka shi a matsayin abin ƙarfafawa a cikin takardar PVC ko bene na birgima don magance faɗaɗa da matsewar zafi, hana gibba ko kumburi tsakanin sassan bene.

Babban Amfani 3: Ƙarfafawa ga Kayayyakin da Ba a Saka ba

Ana amfani da shi don ƙarfafa masaku daban-daban waɗanda ba a saka ba (misali, tissue na fiberglass, tabarmar polyester, gogewa, takardar likita), yana ƙara ƙarfin juriya sosai tare da ƙara ɗan nauyi kaɗan.

Babban Amfani 4: Ƙarfe don Yadi Masu Rufi (misali, Takardar PVC)

Yana aiki a matsayin kayan ƙarfafa tushe wajen samar da murfin manyan motoci, rumfa, tutoci, da kuma mayafin jirgin ruwa, wanda ke ba da juriya da juriya ga tsagewa.

Takardar Bayanan Fiberglass Laid Scrims

Lambar Abu	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Girman raga	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Nauyi (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

Adadin ƙarfafawa da aka yi da laminated scrim na yau da kullun shine 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm da sauransu. Girman wadatar yau da kullun shine 6.5g, 8g, 13g, 15.5g, da sauransu.Tare da ƙarfi mai yawa da nauyi mai sauƙi, ana iya haɗa shi da kusan kowane abu kuma kowane tsawon birgima zai iya zama mita 10,000.

Aikace-aikacen Fiberglass Laid Scrims

a) Haɗaɗɗen Aluminum Foil

An yi amfani da scrim na musamman a masana'antar foil ɗin aluminum. Yana taimakawa wajen kera don haɓaka ingancin samarwa yayin da tsawon birgima zai iya kaiwa mita 10000. Hakanan yana sa samfurin ya ƙare da kyakkyawan bayyanar.

b) Katangar PVC

Ana yin benen PVC galibi da PVC, haka kuma wasu sinadarai masu mahimmanci yayin ƙera shi. Ana samar da shi ta hanyar karewa, ci gaban fitarwa ko wasu ci gaban masana'anta, ana raba shi zuwa benen takarda na PVC da benen roller na PVC. Yanzu duk manyan masana'antun cikin gida da na ƙasashen waje suna amfani da shi azaman Layer na ƙarfafawa don guje wa haɗin gwiwa ko kumburi tsakanin guntu, wanda ke faruwa sakamakon faɗaɗa zafi da matsewar kayan.

c) An ƙarfafa samfuran rukuni marasa saka

Ana amfani da scrim ɗin da ba a saka ba sosai a matsayin kayan ƙarfafawa ga nau'ikan masana'anta marasa saka, kamar su tissue na fiberglass, tabarmar polyester, goge-goge, da kuma wasu ƙarshen sama, kamar takardar likita. Yana iya yin samfuran da ba a saka ba tare da ƙarfin tauri mai yawa ba, yayin da kawai yana ƙara ɗan nauyi kaɗan.