Polyester mesh Laid Scrims for double sided scrim tape for Middle East Countries
Polyester Laid Scrims Brief Introduction
This product is a Polyester Laid Scrim, a cost-effective, high-performance reinforcement fabric engineered specifically as the skeleton substrate for double-sided scrim tape, foam tape, and rubber/plastic adhesive tapes — with the page highlighting its relevance to Middle East market conversion lines. It is manufactured by chemically bonding continuous polyester filament yarns into an open mesh construction (square or tri-directional), with binder options including PVOH, PVC, Acrylic, or customized (including self-adhesive-compatible systems). Compared with glass-fiber scrim, the polyester version offers softer hand-feel, heat sealability, and better coating/lamination compatibility with adhesive masses, making it the preferred base for converting houses producing industrial tapes, HVAC sealing tapes, and construction mounting tapes. The product is highly customizable, with roll widths from 200 to 2500 mm and roll lengths up to 10,000 meters (platform capacity extends to 50,000 m), supporting high-speed coating and slitting lines common among Middle East and export-oriented tape converters.
Polyester Laid Scrims Characteristics
Tape-Optimized Material Properties: The polyester scrim lists a tailored property set for adhesive tape conversion — tensile strength, tear resistance, heat sealable, anti-microbial, water resistance, self-adhesive compatibility, eco-friendly, decomposable, and recyclable. The heat-sealable + self-adhesive pairing is what lets converters run it through hot-melt or solvent coating lines and still get clean anchoring between scrim and adhesive mass.
High Strength & Ultra-Light Weight: The regular non-woven/tape reinforcement grades follow the platform specs: CF12.5×12.5PH ~6.2–6.6 g/m², CF10×10PH ~8–9 g/m², CF6.25×6.25PH ~12–13.2 g/m², CF5×5PH ~15.2 g/m², with 12.5×6.25mm also available for adjusted openness. Each roll length can reach 10,000 m, reducing splicing on high-speed coating lines — a practical advantage for Middle East converters running large master rolls.
Wide Customization & Process Fit: Available in yarn types (Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex, etc.), constructions (square / tri-directional), patterns (0.8–3 yarns/cm), and bonding agents (PVOH, PVC, Acrylic, customized). Polyester grade specifically supports self-adhesive-compatible binders for scrim tape converting.
Polyester Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Polyester Laid Scrims Application
Primary Use: Reinforcement Skeleton for Double-Sided Scrim Tape & Adhesive Tapes
The core and specialized application of this polyester laid scrim is as the reinforcing substrate in double-sided scrim tape, foam tape, and rubber/plastic tape conversion. It is coated or laminated with adhesive mass (solvent, acrylic, hot-melt, etc.) to:
Deliver Tensile & Tear Backbone to the Tape
The scrim carries the tape's tensile load so the adhesive layer doesn't bear it alone — critical for double-sided scrim tapes used in carpet laying, HVAC foil joining, and construction mounting, where the tape must resist pulling, peeling, and shear without elongating.
Enable Clean Conversion & Heat Sealing
Polyester's heat sealability and self-adhesive-compatible binder let the scrim run through hot-melt coaters and slit cleanly, giving converters fewer web breaks and better roll appearance — a frequent pain point on high-speed Middle East lines.
Secondary Applications
Due to its versatile reinforcement properties and open mesh design, this polyester laid scrim is also extensively applied in numerous other industrial sectors:
Aluminum Foil Composite
Used as a reinforcement layer in insulation and building wrap composites; roll lengths up to 10,000 m improve production efficiency and finished product appearance.
Base for Technical Coated Fabrics
Used as the base skeleton in producing durable items like truck covers, light awnings, banners, and sail cloth.
