Polyester mesh fabric laid scrims for reinforced medical blood-absorbing paper tissue for Middle East Countries
Polyester Laid Scrims Brief Introduction
This product is a Polyester Laid Scrim, a cost-effective, high-performance reinforcement fabric engineered specifically for medical blood-absorbing paper tissue and medical-grade absorbent papers supplied to Middle East markets. It is manufactured by chemically bonding continuous polyester filament yarns into an open mesh construction (square or tri-directional), with optional binder systems (PVOH, PVC, Acrylic, or customized — including hot-melt for medical paper lamination). Compared with glass-fiber scrims, the polyester version offers softer hand-feel, heat sealability, anti-microbial properties, water resistance, and recyclability — a profile purpose-built for disposable medical consumables where the substrate must absorb fluid, resist tearing under gloved handling, and remain compatible with sealing or converting equipment. The scrim is laminated into or behind the medical paper tissue to become a hidden "tensile skeleton" that prevents the pad from falling apart when saturated with blood or exudate. The product is highly customizable, with roll widths from 200 to 2500 mm and roll lengths up to 50,000 meters, supporting high-speed medical paper/non-woven converting lines.
Polyester Laid Scrims Characteristics
Medical-Grade Material Profile: The polyester scrim carries a set of properties purpose-built for hygiene and medical consumables — tensile strength, tear resistance, heat sealability, anti-microbial properties, water resistance, self-adhesive options, eco-friendliness, decomposability, and recyclability. This combination lets the scrim reinforce disposable medical paper without compromising processability or end-use safety.
High Strength & Ultra-Light Weight: Reinforcement comes at very low GSM. Regular medical/non-woven grades on this platform include CF12.5×12.5PH (~6.2–6.6 g/m²), CF10×10PH (~8–9 g/m²), CF6.25×6.25PH (~12–13.2 g/m²), CF5×5PH (~15.2 g/m²), with 12.5×6.25mm also available for adjusted openness. The high strength-to-weight ratio lets blood-absorbing tissue stay thin, flexible, and conformable while gaining meaningful tear resistance.
Process Compatibility for Medical Converting: Available in yarn types beyond polyester (Glass, Carbon, Kevlar, Nomex, Cotton, Flax, Jute, Viscose, etc.), constructions (square / tri-directional), patterns (0.8–3 yarns/cm), and bonding agents (PVOH, PVC, Acrylic, customized including hot-melt).
Polyester Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Polyester Laid Scrims Application
Primary Use: Reinforcement for Medical Blood-Absorbing Paper Tissue & Medical Absorbent Papers
The core and specialized application of this polyester laid scrim is as a hidden tensile skeleton laminated into or behind medical blood-absorbing tissue, surgical absorbent paper, and other medical-grade disposable papers for hospitals, labs, and clinical settings across Middle East markets. It is laminated into the paper stack to:
Prevent Disintegration When Saturated
Blood-absorbing tissue must pull fluid while staying intact under gloved handling, folding, or placement. The scrim arrests tear propagation so the pad does not lint, split, or fall apart when saturated — critical for OR and emergency settings.
Maintain Conformability & Drape While Adding Strength
The open mesh adds multi-directional tensile with minimal mass, so the tissue remains flexible and conformable to body contours or instrument trays, rather than turning stiff like a woven insert would.
Enable Heat-Sealing & Converting Compatibility
With PVOH or hot-melt binders, the scrim is compatible with thermal laminating and sealing processes used in medical paper converting — allowing the reinforced tissue to be heat-sealed into pouches, pads, or sterile-pack components.
Secondary Applications
Due to its versatile reinforcement properties and open mesh design, this polyester laid scrim is also extensively applied in other industrial sectors listed on the product page:
Aluminum Foil Composite
Used as a reinforcement layer in insulation and building wrap composites; roll lengths up to 10,000 m (platform 50,000 m) improve production efficiency and finished product appearance.
PVC Flooring
Used as a reinforcement layer in insulation and building wrap composites; roll lengths up to 10,000 m (platform 50,000 m) improve production efficiency and finished product appearance.
