Non-woven laid scrims laminated for snowboards for reinforcement solutions
Non-woven laid scrims Brief Introduction
A laid scrim engineered for lamination into snowboard composites, this product sits within the site's Sports category alongside sail laminates, table tennis rackets, and kiteboard sandwich builds. It functions as the hidden tensile grid laminated into or between the skin layers (foil / non-woven / composite fabric) and the core of the ski/snowboard sandwich. Manufactured by chemically bonding continuous filament yarns into a flat-laid open mesh (square or tri-directional), with binder options (PVOH, PVC, Acrylic, or customized) to match skin laminating and sandwich-press processes. The chemically bonded construction yields lightweight, high strength, low shrinkage/low elongation, and corrosion resistance, enabling the board to endure constant flex, hard pack landings, and freeze–thaw/UV cycles without adding unnecessary weight to the ride.
Non-woven laid scrims Characteristics
Snowboard-Grade Property Profile: Dimensional stability, tensile strength, alkali resistance, tear resistance, fire resistance, anti-microbial properties, water resistance — the scrim's low elongation keeps the foil–composite skin flat through constant flex and park/backcountry landings, while multi-directional tensile arrests crack initiation at edge channels, insert zones, and binding-mount areas. Every gram counts on a rider's board; the scrim's low added weight preserves swing weight, pop response, and swing feel in deep snow.
High Strength & Light Weight: Available in a range of regular mesh sizes and grammages covering the platform's common specifications (including fine to coarse grids, with typical grammages such as 6.5g, 8g, 13g, 15.5g per square meter, etc.), delivering high tensile and tear resistance at minimal added weight. Fully bondable with almost any skin/core material; each roll length up to 50,000 m to support continuous board laminating and sandwich lines.
Non-woven laid scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Non-woven laid scrims Application
Primary Use: Reinforcement for Ski/Snowboard Sandwich Composites
Snowboards see aggressive flex, hard-pack chop, rail slides, and cliff drops. The scrim's multi-directional tensile reinforces the skin–core interface so delamination doesn't start at heel dents, edge dings, or binding stresses — extending board life under resort and backcountry abuse.
Keep Swing Weight Low
The scrim adds meaningful tensile reinforcement at very low GSM, keeping the total board weight down — directly protecting pop, swing feel in powder, and edge-to-edge response, which are the defining metrics of snowboard design.
Enable High-Efficiency Laminating Across the Sports Category
50,000 m roll length feeds high-speed laminating and sandwich lines with fewer splice stops — higher yield per shift, more consistent batch appearance across ski/snowboard, kiteboard, and racket programs.
Secondary Applications
a) Aluminum Foil Composite
b) PVC Flooring
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
