laid scrim for lamination
Fiberglass Laid Scrims Brief Introduction
This product is a Laid Scrim (glass, polyester, carbon, or hybrid) positioned as a general-purpose reinforcement substrate for laminating with other materials — a cost-effective, open-mesh fabric made from continuous filament yarns in a chemically bonded, flat-laid construction (square or tri-directional). Ruifiber / Xuzhou Gadtex makes these scrims to order for specific usages; the chemically bonded construction permits economical reinforcement of the customer's product and is designed to be highly compatible with the customer's process and substrate, whether foil, non-woven, PVC, paper, tissue, mat, or technical textile. This "lamination" listing is the platform-level, universal entry that feeds into aluminum foil insulation, PVC flooring, non-woven reinforcement, PVC tarpaulin, and extended automotive/building/outdoor categories.
Fiberglass Laid Scrims Characteristics
Lamination-Grade Property Profile: Dimensional stability, tensile strength, alkali resistance, tear resistance, fire resistance, anti-microbial properties, water resistance — a profile that suits foil, non-woven, PVC, paper, and technical textile laminating lines, and bonds readily with many material systems.
Long Rolls for Lamination Lines: Roll width 200–2,500 mm; each roll length can be 10,000 m (platform up to 50,000 m), helping manufacturers improve production efficiency and giving finished products better appearance. Fewer splices per shift on high-speed laminating, coating, and slitting lines.
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass Laid Scrims Application
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
