Fiberglass mesh fabric laid scrims fiberglass tissue composites mat
Fiberglass mesh fabric laid scrims fiberglass tissue composites mat Brief Introduction
Chemically bonded flat-laid E-glass scrim serving as the hidden tensile grid in automotive interior composites — headliners, door linings, rear shelves, seat backs, wheel-arch liners, undershields, foams punched parts, engine casing & sound deadening. Low elongation + multi-directional tensile stop sag, fastener-zone tear, and gap-line drift through press-forming and cabin thermal cycles.
Fiberglass mesh Characteristics
Automotive interior grade: Dimensional stability, tensile, alkali resistance, tear resistance, fire resistance, anti-microbial, water resistance.
Data sheet: CF12.5×12.5PH 6.2–6.6 g/m² / CF10×10PH 8–9 / CF6.25×6.25PH 12–13.2 / CF5×5PH 15.2; bonds with PP, PET, PUR/PE foam, decorative films.
Long roll 10,000 m (platform 50,000 m): fewer splices on tier-1 interior laminating/thermoforming lines.
Fiberglass Laid Scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5x12.5mm,10x10mm,6.25x6.25mm, 5x5mm,12.5x6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Fiberglass Laid Scrims Application
Primary – Automotive interior reinforcement
Laminated into non-woven/PP/GMT stacks for headliners, door linings, rear shelves, seat backs, wheel-arch liners, undershields, foams punched parts, engine casing & sound deadening. Restrains sag at grab handles/sunshades, arrests fastener-zone tear, preserves gap lines. 50,000 m rolls feed headliner/door-lining lines with fewer stops.
Secondary Applications
a) Aluminum Foil Composite
Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.
b) PVC Flooring
PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.
c) None-woven category products reinforced
None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.
d) PVC Tarpaulin
Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.
