Fiberglass raga masana'anta Laid Scrim don kera iska injin turbin ruwa
Gabatarwa Takaitaccen Bayani Game da Fiberglass Laid Scrims
Wannan samfurin shineFiberglass Laided Scriman sanya shi doniska injin turbin ruwa hadadden masana'antu— ana amfani da shi azaman kwarangwal mai ƙarfi, mai ƙarfi a cikin laminates na epoxy/vinyl ester da tsarin sandwich (cibiya + fata). An yi shi daZaren filament na E-glass mai ci gabaan shimfida shi a cikin tsari mai buɗewa da raga kumahaɗakar sinadarai a cikin ƙwayoyin cuta(PVOH / PVC / Acrylic ko na musamman). Ba kamar yadin da aka saka ko manyan yadi biyu ba, yadin da aka shimfiɗa yana riƙe zare madaidaiciya da ƙarancin ƙura, yana ƙara tallafi mai yawa na tensile a hanya ɗaya kawai.6.2–15.2 g/m²(ya danganta da raga). Ga ruwan wukake masu tsawon mita 40-100 kuma an gina su akan zagayowar jiko ko shirye-shiryen sa'o'i da yawa, scrim ɗin yana aiki azamanLayer mai daidaita saman ko kuma tsakanin ganyewanda ke taimakawa wajen sarrafa wrinkles na gida, yana tsayayya da magance karkacewar yayin layout, kuma yana ƙara ƙarfin UD/carbon na farko ba tare da ƙara nauyi mai ma'ana ba.
Gadtex (Xuzhou Gadtex / Shanghai Gadtex) tana samar da kayan aikin laid scrim tun daga shekarar 2018 kuma tana samar da kayayyaki sama da 50; wannan nau'in ruwan wukake yana ginawa akan dandamali iri ɗaya da benen PVC da kuma kayan aikin aluminum foil, ammatsawon birgima mai tsawo (har zuwa mita 50,000)kumafaɗi har zuwa 2,500 mmSu ne abin da ya fi muhimmanci ga masana'antun ruwan wukake da ke gudanar da lamination akai-akai ko kuma babban tsari na layout na hannu/atomatik.
Halayen Fiberglass Laid Scrims
Manyan Kayayyakin Kayan Aiki:Scrim ɗin yana da cikakkun siffofi masu amfani, waɗanda suka haɗa da juriya mai yawa, kyakkyawan kwanciyar hankali, sassauci, ƙarancin raguwa, ƙarancin tsayi, juriyar alkali, juriyar wuta, da juriyar tsatsa - duk suna da mahimmanci ga yanayin iska mai dorewa da waje.
Babban Ƙarfi & Nauyin Haske:;Yana ba da ƙarfi mai yawa yayin da yake da sauƙi. Takamaiman bayanai na yau da kullun kamar CF12.5×12.5PH suna da nauyin kimanin 6.2–6.6 g/m², CF10×10PH yana da nauyin kusan 8–9 g/m², kuma CF5×5PH yana da nauyin kusan 15.2 g/m². Wannan babban rabon ƙarfi-da-nauyi yana ba shi damar haɓaka daidaiton fatar wukake da canja wurin yanke tsakanin layuka tare da ƙaramin nauyi.
Zaɓuɓɓukan Kayan Aiki da Keɓancewa Masu Faɗi:;Akwai shi a nau'ikan zare daban-daban (Gilashi, Polyester, Carbon, Kevlar, Nomex, da sauransu), gine-ginen raga (Murabba'i, mai kusurwa uku), alamu (0.8-3 zare/cm), da kuma abubuwan haɗin gwiwa (PVOH, PVC, Acrylic, wanda aka keɓance shi). Tsarin naɗewa mai tsayi (har zuwa mita 50,000) yana tallafawa ingantaccen tsarin shimfida ruwan wukake ko lamination.
Takardar Bayanan Fiberglass Laid Scrims
| Lambar Abu | CF12.5*12.5PH | CF10*10PH | CF6.25*6.25PH | CF5*5PH |
| Girman raga | 12.5 x 12.5mm | 10 x 10mm | 6.25 x 6.25mm | 5 x 5mm |
| Nauyi (g/m2) | 6.2-6.6g/m2 | 8-9g/m2 | 12-13.2g/m2 | 15.2-15.2g/m2 |
Adadin ƙarfafawa da aka yi da laminated scrim na yau da kullun shine 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm da sauransu. Girman wadatar yau da kullun shine 6.5g, 8g, 13g, 15.5g, da sauransu.Tare da ƙarfi mai yawa da nauyi mai sauƙi, ana iya haɗa shi da kusan kowane abu kuma kowane tsawon birgima zai iya zama mita 10,000.
Aikace-aikacen Fiberglass Laid Scrims
Babban Amfani: Ƙarfafawa ga Haɗaɗɗun Ruwan Turbine na Iska
Babban amfani da wannan fiberglass scrim shine kamar haka:Layer mai sauƙin daidaitawaa cikin tarin ruwan wukake — tsakanin murfin gel/rufin saman da babban ƙarfafa UD/carbon, ko kuma a matsayin haɗin gwiwa a cikin ginin sandwich tare da core PVC/PET/balsa. An lankwasa shi cikin tsarin ruwan wukake don:
Sarrafa Wrinkles da Yankunan da ke da wadataccen Resin
Ana yin benen PVC galibi da PVC, haka kuma wasu sinadarai masu mahimmanci yayin ƙera shi. Ana samar da shi ta hanyar karewa, ci gaban fitarwa ko wasu ci gaban masana'anta, ana raba shi zuwa benen takarda na PVC da benen roller na PVC. Yanzu duk manyan masana'antun cikin gida da na ƙasashen waje suna amfani da shi azaman Layer na ƙarfafawa don guje wa haɗin gwiwa ko kumburi tsakanin guntu, wanda ke faruwa sakamakon faɗaɗa zafi da matsewar kayan.
Daidaita Fatan Sandwich & Core Contact
Yana ƙara ƙaramin matakin "anchor" na GSM wanda ke inganta canja wurin yanke tsakanin kumfa/balsa core da fatar GFRP ba tare da ƙara nauyi mai mahimmanci ba - yana da mahimmanci ga sauye-sauyen rufewa da kuma sauye-sauyen yanar gizo.
Rage Lalacewa da Rage Lalacewa
Juriyar tsagewar scrim da kwanciyar hankali na girma suna taimakawa wajen yin layouts na busasshe ko B-stage suna riƙe siffar yayin sanyawa, sanya jakunkunan tsotsa, da jigilar su cikin mold, wanda ke rage tarkace da sake yin aiki.
Aikace-aikacen Sakandare
Saboda kyawawan kaddarorin ƙarfafawa da ƙirar raga mai buɗewa, wannan ƙirar fiberglass da aka shimfiɗa kuma ana amfani da ita sosai a wasu fannoni na masana'antu da yawa:
Haɗaɗɗen Aluminum Foil
Ana amfani da shi azaman ƙarin kayan ƙarfafawa a cikin haɗakar rufi da naɗe gini, yana inganta ingancin samarwa da bayyanar samfurin da aka gama.
Katako na PVC
Yana aiki a matsayin muhimmin matakin daidaita yanayi don magance faɗaɗa da matsewar kayan bene, yana hana rabuwar haɗin gwiwa ko kumburi.
Ƙarfafawa ga Daban-daban Marasa Saƙa
Ana shafa shi a kan kayan kamar nama na fiberglass, tabarmar polyester, da goge-goge don ƙara ƙarfin juriya tare da ƙara ɗan nauyi.
