Laid Scrims Manufacturer and Supplier

What kind of fabric is protective clothing made of?


What kind of fabric is protective clothing made of

The protective clothing has different properties due to the different raw materials used. At present, there are mainly several nonwovens in the market.

What kind of fabric is protective clothing made of (6) What kind of fabric is protective clothing made of What kind of fabric is protective clothing made of (2)

What kind of fabric is protective clothing made of (3) What kind of fabric is protective clothing made of (4) What kind of fabric is protective clothing made of (5)

1. Polypropylene spunbond.

 

Polypropylene spunbond can be treated with antibacterial and antistatic, and made into antibacterial protective clothing and antistatic protective clothing. Because of its low price and disposable use, cross infection rate can be greatly reduced. However, the static pressure resistance of the material is relatively low, and the efficiency of the virus particle barrier is also poor, which can only be used as general protective equipment such as sterile surgical clothing and disinfection bag cloth.

 

2. A water spurt made of polyester fiber and wood pulp.

 

The material is soft in hand, close to the traditional textile, and can be treated with three anti-alcoholic, anti blood, oil resistant, antistatic and antibacterial methods, which can be used γ The rays were sterilized. But its static water pressure is relatively low, and the efficiency of virus particle isolation is also poor.

 

3. Polypropylene spunbonde, melt spray, spunbond composite nonwovens, namely SMS or SMMs.

 

The characteristics of the melt jet cloth are fine fiber diameter, large specific surface area, fluffy, soft, good drape, small filtration resistance, high filtration efficiency, strong static water pressure resistance, but low strength and poor wear resistance. The fiber density of spunbond is larger, and the fiber net is composed of continuous filament. Its breaking strength and elongation are much larger than that of melt blown fabric, which can make up for the shortage of the fusible cloth. This composite fabric is now popular with customers at home and abroad.

 

Protective clothing fabrics are widely used in pharmaceutical, agricultural, clean rooms, painting, medical protection, and even personal protection in the severe period of the epidemic.

 

Now, by adding a layer of Shanghai Ruifiber’s laid scrim between non-woven fabric and film, the strength of protective clothing can be better increased, and the tear can be prevented. The cost has not increased much, and the strength has been greatly enhanced. It can greatly prolong the use time of protective clothing, reduce the cost and frequent replacement time.

 

Welcome to contact Shanghai Ruifiber to discuss the further application of laid scrim in the field of protective fabric.


Post time: Jun-16-2021

WhatsApp Online Chat !