Litanka tse Tummeng tsa Liphaephe 4x6mm Polyester Laid Scrim Mesh

Litanka tse Tummeng tsa Liphaephe tsa 4x6mm Polyester Laid Scrim Mesh tse Hlahisitsoeng Setšoantšo se Hlahisitsoeng

Tlhaloso e Khutšoanyane:

Bophara ba Moqolo:200 ho isa ho 2500 mm

Bolelele ba Moqolo::Ho fihlela ho 50 000 m

Mofuta oa Likhoele::Khalase, Polyester, Khabone, K'hothone, Folaxe, Jute, Viscose, Kevlar, Nomex,

Kaho::Sekwere, se nang le mahlakore a mararo

Mekhoa::Ho tloha ho likhoele tse 0.8/cm ho isa ho likhoele tse 3/cm

Kopanyo::PVOH, PVC, Acrylic, e etselitsoeng uena

Romella imeile ho rona Khoasolla e le PDF

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela se Khutšoanyane sa Polyester Laid Scrims

Sehlahisoa sena keScrim ea Polyester e Behiloenge nang leLetlooeng la 4x6mm. E entsoe e le lesela la ho tiisa le theko e tlase le entsoeng ka khoele ea filament e tsoelang pele ka har'a moaho o bulehileng oa letlooeng, e tsebahala ka ho tuma ha eona le katleho ea eona lits'ebetsong tse amanang letlhahiso ea lipeipi le tankaScrim e hokahantsoe ka lik'hemik'hale nakong ea tlhahiso, e e ntlafatsang ka litšobotsi tse ikhethang tse etselitsoeng ho matlafatsa lihlahisoa tse kopaneng ka mokhoa o theko e tlase le o lumellanang haholo.

Litšobotsi tsa Li-Scrims tsa Polyester tse Behiloeng

Matla a Phahameng le Boima bo Bobebe:Ho ya ka leqephe la data, skrim ena ya 4x6mm (Nomoro ya Ntho CP4 * 6PH) e na le boima ba hoo e ka bang 7.8-10 g/m². E fana ka matla a maholo a ho kganna le ho hanyetsa ho taboha ha e ntse e eketsa boima bo fokolang, ntlha ya bohlokwa bakeng sa ho boloka karolelano ya matla-ho-boima mehahong e meholo jwalo ka ditanka le diphaephe.

Ho Hanela Tshenyo le Lik'hemik'hale:Polyester e fana ka khanyetso ea tlhaho ho lik'hemik'hale tse ngata le tikoloho e senyang. Sena se etsa hore scrim e lokele liphaephe tse matlafatsang le litanka tsa polokelo tse ka sebetsanang le maro a mabifi, e leng se thusang ho lelefatsa bophelo ba ts'ebeletso ea sebopeho se kopaneng.

Botsitso bo Tlase ba ho Shrinkage le Tekanyo:E na le ho fokotseha le ho lelefala ho tlase haholo, e leng ntho ea bohlokoa bakeng sa ho boloka sebopeho le botšepehi ba motsoako o matlafalitsoeng tlas'a khatello e fapaneng ea mocheso le ea mechini e kopanang le lits'ebetsong tsa lipeipi le litanka.

Matlotlo a mang a Molemo:Sehlahisoa sena se boetse se bontša ho tiea ha mocheso, thepa ea ho loantša likokoana-hloko, ho hanela metsi, 'me se ka etsoa hore se khomarele. Se hlalosoa e le se mosa tikolohong, se bolang, le se ka sebelisoang hape.

Leqephe la Data la Scrims tsa Polyester

Nomoro ea Ntho	CP2.5*5PH	CP2.5*10PH	CP4*6PH	CP8*12PH
Boholo ba letlooeng	2.5 x 5mm	2.5 x 10mm	4 x 6mm	8 x 12.5mm
Boima (g/m2)	5.5-6g/m2	4-5g/m2	7.8-10g/m2	2-2.5g/m2

Phepelo e tloaelehileng ea matlafatso e sa lohiloeng le scrim e nang le laminated ke 2.5x5mm 2.5x10mm, 3x10mm, 4x4mm, 4x6mm, 5x5mm, 6.25x12.5mm jj. Ligrama tse tloaelehileng tsa phepelo ke 3g, 5g, 8g, 10g, jj.Ka matla a maholo le boima bo bobebe, e ka kopanngoa ka botlalo le thepa efe kapa efe 'me bolelele ba moqolo ka mong e ka ba limithara tse 10,000.

Kopo ea Li-Scrims tsa Poliester

Letlooeng la Scrim le Tummeng ka ho Fetisisa Litanka tsa Liphaephe 4x6mm Polyester Laid Scrim ke lesela le ikgethang la ho matlafatsa le sebetsanang le ditlhoko tsa motheo tsa sebopeho sa indasteri ya diphaephe le ditanka. Letlooeng la lona le leka-lekaneng la 4x6mm le fana ka matla le botsitso bo botle, ha thepa ya polyester e netefatsa ho tshwarella le ho hanyetsa dikhemikhale. Ka ho fana ka tharollo e bobebe empa e le matla ya ho matlafatsa, e nolofalletsa tlhahiso ya diphaephe tse kopaneng tse matla, tse tshepahalang le tse nkang nako e telele le ditanka tsa polokelo, e fana ka boleng bo boholo ditshebedisong tse hlokang thuso tsa diindasteri.

matlafatso bakeng sa Pipeline le Tank Fabrication

Jwalo ka ha ho totobaditswe lebitsong la sehlahiswa, sekwahelo sena sa polyester sa 4x6mm se sebediswa haholo ho matlafatseng diphaephe le ditanka, haholoholo tlhahisong ya Glass Reinforced Plastic (GRP) kapa diphaephe tse kopaneng le dijana tsa polokelo. E kentswe sebopehong se kopaneng nakong ya ditshebetso tsa tlhahiso jwalo ka ho phetholla di-filament kapa lamination.

E sebetsa e le lesapo le jarang mojaro ka hare ho lebota le kopaneng, e fana ka matla a bohlokoa a ho tsitlallela, ho hanyetsa mapetso, le ho hanyetsa ho thulana. Sena se eketsa ho tšoarella ka kakaretso, tekanyo ea khatello, le nako e telele ea liphaephe le litanka, haholo-holo tse sebelisoang ts'ebetsong ea lik'hemik'hale, kalafo ea metsi, kapa ts'ebeliso ea oli le khase.

Ka lebaka la boima bo bobebe, matla a phahameng, ho fokotseha/ho lelefala ho tlase, thibelo ea mafome, li-scrims tse behiloeng li fana ka boleng bo boholo ha li bapisoa le likhopolo tsa thepa ea setso. 'Me ho bonolo ho li laminate ka mefuta e mengata ea thepa, sena se etsa hore e be le masimo a mangata a ts'ebeliso.