Li-scrims tse betliloeng ka letlooeng bakeng sa moriti oa letsatsi tse tšolotsoeng liindastering

Li-scrims tse betliloeng ka letlooeng bakeng sa setshelo sa letsatsi sehatsetsing sa indasteri Setšoantšo se Hlahisitsoeng

Tlhaloso e Khutšoanyane:

Bophara ba Moqolo:200 ho isa ho 2500 mm

Bolelele ba Moqolo::Ho fihlela ho 50 000 m

Mofuta oa Likhoele::Khalase, Polyester, Khabone, K'hothone, Folaxe, Jute, Viscose, Kevlar, Nomex,

Kaho::Sekwere, se nang le mahlakore a mararo

Mekhoa::Ho tloha ho likhoele tse 0.8/cm ho isa ho likhoele tse 3/cm

Kopanyo::PVOH, PVC, Acrylic, e etselitsoeng uena

Romella imeile ho rona Khoasolla e le PDF

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela se Khutšoanyane sa Polyester Laid Scrims

Sehlahisoa sena keScrim ea Polyester e Behiloeng, lesela la ho tiisa le theko e tlase le entsoeng ka ho khetheha bakeng sali-shed tsa moriti oa letsatsi tsa indasteri. E entsoe ka khoele ea polyester e tsoelang pele ka moaho o bulehileng oa letlooeng, e kopantsoeng ka lik'hemik'hale ho etsa thepa e tsitsitseng le e feto-fetohang. E etselitsoe ho lumellana haholo le lits'ebetso tse fapaneng tsa indasteri, e fana ka matla a ikhethang a ho thaepa, ho hanyetsa ho taboha le ho tšoarella, e leng se etsang hore e be thepa ea motheo e loketseng bakeng sa ho hlahisa litharollo tsa moriti tse tšoarellang, tse hanyetsanang le boemo ba leholimo le tse utloahalang bakeng sa tikoloho ea indasteri.

Litšobotsi tsa Li-Scrims tsa Polyester tse Behiloeng

Matla a Phahameng a Mechini le ho Tšoarella:E fana ka matla a ho thapolla le ho hanyetsa meokho, e leng ea bohlokoa bakeng sa ho mamella moroalo oa moea, likhatello tsa tikoloho, le ho pepesehela kantle nako e telele libakeng tsa indasteri.

Matlotlo a Sebetsang a Phahameng:E bonahatsa ho tiea ha mocheso, thepa ea ho loantša likokoana-hloko, ho hanyetsa metsi, 'me e ka etsoa hore e khomarele. E boetse e hlalosoa e le e mosa ho tikoloho, e bolang, le e ka sebelisoang hape.

E bobebe le Tshebetso e Phahameng: E fumaneha ka boholo bo fapaneng ba letlooeng (mohlala, 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm) ka boima bo tsamaellanang bo ntlafalitsoeng, e fanang ka matlafatso e kholo ka boima bo fokolang bo ekelitsoeng, e leng molemo bakeng sa meaho e meholo.

Ho lumellana ha Ts'ebetso ka Botlalo le ho Iketsetsa Lintho ka Mokhoa o Ikhethileng: E etselitsoe ho kopanngoa ka mokhoa o se nang sekoli lits'ebetsong tsa tlhahiso bakeng sa masela a koahetsoeng le li-laminate. E ka fetoloa haholo ka likhetho tsa bophara ba meqolo (200 ho isa ho 2500 mm), bolelele ba meqolo bo bolelele haholo (ho fihlela ho limithara tse 50,000), le metsoako e fapaneng ea ho kopanya (PVOH, PVC, Acrylic, jj.), e nolofalletsang tlhahiso e sebetsang hantle le e kholo.

Leqephe la Data la Scrims tsa Polyester

Nomoro ea Ntho	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Boholo ba letlooeng	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Boima (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

Phepelo e tloaelehileng ea matlafatso e sa lohiloeng le scrim e nang le laminated ke 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm jj. Ligrama tse tloaelehileng tsa phepelo ke 6.5g, 8g, 13g, 15.5g, jj.Ka matla a maholo le boima bo bobebe, e ka kopanngoa ka botlalo le thepa efe kapa efe 'me bolelele ba moqolo ka mong e ka ba limithara tse 10,000.

Kopo ea Li-Scrims tsa Poliester

Tšebeliso ea mantlha: Thepa ea motheo bakeng sa Li-Shed tsa moriti oa letsatsi tsa indasteri

Jwalo ka ha lebitso la sehlahiswa le bontsha, tshebediso ya mantlha ke thepa ya motheo ya ho matlafatsa tlhahiso ya di-shed tsa moriti wa letsatsi tsa diindasteri, di-awning, le meaho e tshwanang ya moriti wa kantle. Sekoti se kopantswe le masela a manehilweng kapa thepa e kopaneng ho:

Fana ka Botšepehi ba Sebopeho le Botsitso ba Tekanyo

E ntlafatsa haholo matla le ho hanyetsa lesela ho otlolla, e netefatsa hore sebopeho sa moriti se boloka sebopeho sa sona mme se ka mamella kgatello ya mechine e tswang moeeng, lehlwa kapa ditshila.

Ntlafatsa Khanyetso ea Meokho le Bophelo bo Bolelele

E thibela lesela ho taboha habonolo tlas'a khatello kapa ho otloa, e lelefatsa bophelo ba tšebeletso ea shed ea moriti oa letsatsi libakeng tse thata tsa indasteri.

Nolofatsa Meralo e Bobebe le e Tšoarellang

E dumella ho thehwa ha ditharollo tse kgolo, tse tshwarellang tsa moriti tse bobebe bakeng sa ho kenya le ho tshehetsa habonolo.

Likopo tsa Bobeli

Ka lebaka la thepa ea eona e feto-fetohang, polyester ena e betliloeng scrim e boetse e sebelisoa haholo mafapheng a mang a indasteri le a kaho:

Aluminium Foil e kopantsoeng

E sebelisoa e le lera la ho matlafatsa lintho tse kopanyang ho kenya mocheso le ho phuthela ka moaho, e ntlafatsang katleho ea tlhahiso le ponahalo ea sehlahisoa.