Takardar takarda ta kraft ta amfani da fiberglass don yin amfani da takarda mai launi

An yi wa yadin fiberglass ɗin da aka yi da zare don takardar takarda ta kraft ta aluminum. Hoton da aka nuna

Takaitaccen Bayani:

Faɗin Naɗi:200 zuwa 2500 mm

Tsawon Naɗi::Har zuwa mita 50,000

Nau'in Zare::Gilashi, Polyester, Carbon, Auduga, Flax, Jute, Viscose, Kevlar, Nomex,

Gine-gine::Murabba'i, mai kusurwa uku

Samfura::Daga zare 0.8/cm zuwa zare 3/cm

Haɗawa::PVOH, PVC, Acrylic, na musamman

Aika mana imel Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwa Takaitaccen Bayani Game da Fiberglass Laid Scrims

Wannan samfurin shineFiberglass Laided Scrim, wani masaka mai ƙarfi mai inganci kuma mai araha wanda aka ƙera musamman don amfani aaluminum foil scrim kraft composites takardaAn ƙera shi ne daga zaren filament na gilashi mai ci gaba a cikin wani tsari na raga mai buɗewa, wanda aka haɗa shi da sinadarai don samar da kayan aiki mai ƙarfi, mai sauƙi, kuma mai ƙarfi sosai. An ƙera shi don dacewa mai kyau da sauƙin lanƙwasawa tare da foil ɗin aluminum da takarda kraft, yana aiki azaman muhimmin matakin ƙarfafawa wanda ke haɓaka halayen injiniya, dorewa, da bayyanar samfurin haɗin gwiwa na ƙarshe, wanda ake amfani da shi sosai a cikin rufi da nade-naden gini.

Halayen Fiberglass Laid Scrims

Kayayyakin Kayan Aiki Mafi Kyau:Fiberglass scrim yana da cikakkun siffofi masu amfani, waɗanda suka haɗa da juriya mai yawa, kyakkyawan kwanciyar hankali, sassauci, ƙarancin raguwa, ƙarancin tsayi, juriyar alkali, juriyar wuta, da juriyar tsatsa.

Babban Ƙarfi & Nauyin Haske:Yana bayar da ƙarin ƙarfi mai yawa yayin da yake ƙara ƙaramin nauyi. Ana samunsa a cikin girman raga na yau da kullun tare da nauyin da aka inganta, kamar CF12.5 * 12.5PH (kimanin 6.2-6.6 g/m²), CF10 * 10PH (kimanin 8-9 g/m²), CF6.25 * 6.25PH (kimanin 12-13.2 g/m²), da CF5 * 5PH (kimanin 15.2 g/m²), yana ba da kyakkyawan rabo na ƙarfi-da-nauyi. Ana iya haɗa shi da kusan kowane abu.

Kyakkyawan Dacewa da Inganci a Tsarin Aiki:An ƙera shi don sauƙin haɗawa cikin hanyoyin kera kamar lamination. Ana samar da shi a cikin dogayen nadi (kowane nadi zai iya kaiwa mita 10,000, tare da matsakaicin tsayin nadi har zuwa mita 50,000), wanda ke inganta ingantaccen samarwa sosai kuma yana rage lokacin aiki ga masana'antun.

Takardar Bayanan Fiberglass Laid Scrims

Lambar Abu	CF12.5*12.5PH	CF10*10PH	CF6.25*6.25PH	CF5*5PH
Girman raga	12.5 x 12.5mm	10 x 10mm	6.25 x 6.25mm	5 x 5mm
Nauyi (g/m2)	6.2-6.6g/m2	8-9g/m2	12-13.2g/m2	15.2-15.2g/m2

Adadin ƙarfafawa da aka yi da laminated scrim na yau da kullun shine 12.5x12.5mm, 10x10mm, 6.25x6.25mm, 5x5mm, 12.5x6.25mm da sauransu. Girman wadatar yau da kullun shine 6.5g, 8g, 13g, 15.5g, da sauransu.Tare da ƙarfi mai yawa da nauyi mai sauƙi, ana iya haɗa shi da kusan kowane abu kuma kowane tsawon birgima zai iya zama mita 10,000.

Aikace-aikacen Fiberglass Laid Scrims

Babban Amfani: Ƙarfafawa don Takardar Kraft ta Aluminum Foil

Babban amfani da wannan fiberglass scrim na musamman shine a matsayin wani ƙarin ƙarfi a cikin samar da takardar kraft scrim na aluminum foil, wani abu mai haɗaka da ake amfani da shi sosai don rufin da shingen tururi a masana'antar gini. An lankwasa shi tsakanin takardar aluminum da takardar kraft don:

Inganta Ƙarfin Tashin Hankali & Kwanciyar Hankali

Yana ƙara juriyar haɗakar ga tsagewa da miƙewa sosai, yana tabbatar da cewa yana kiyaye mutuncinsa da siffarsa yayin shigarwa da kuma ƙarƙashin matsin lamba daban-daban na muhalli.

Inganta Ingancin Samarwa & Ingancin Samfura

Tsarin dogon naɗin yana ba da damar ci gaba da aiwatar da lamination mai sauri, rage canje-canjen kayan aiki da sharar gida. Hakanan yana ba da gudummawa ga bayyanar samfurin gamawa mai santsi da daidaito.

Samar da Muhimman Halayen Aiki

Juriyarsa ta wuta, juriyar tsatsa, da kuma juriyar alkali sun sa haɗin ƙarshe ya dace da aikace-aikacen gini mai wahala.

Aikace-aikacen Sakandare

Saboda kyawawan kaddarorin ƙarfafawa, ana amfani da wannan nau'in fiberglass scrim a fannoni da yawa a wasu fannoni na masana'antu:

Katako na PVC

Ana amfani da shi azaman muhimmin matakin ƙarfafawa a cikin Takardar PVC da Bene Mai Naɗi don magance faɗaɗa da matsewar kayan zafi, yana hana rabuwar haɗin gwiwa ko kumburi tsakanin sassan bene.